Olympus OM-D E-M1 Mark I parts set: eyecup, accessory port cover, battery door lever

This set of three replacement parts – an eyecup, an accessory port cover and a battery door lever – is printed to order in tough PETG. It is intended to replace parts that are missing from your camera. The eyecup is rigid and cosmetic only; it is not a soft rubber eyecup.

What you get

• One eyecup, one accessory port cover and one battery door lever, all in black PETG.
• Parts only: the camera, battery door, battery and any screws or other fixings are not included.
• The eyecup is rigid, not soft – see FITTING below.

Intended for

The design is based on parts made for the Olympus OM-D E-M1 (Mark I) mirrorless camera; the designer made them for their own camera. We have not yet confirmed the fit on this model.

The set has not been checked on the later E-M1 Mark II or Mark III.

Check the fit

Compare the parts missing from your camera with the photos before ordering. If you are unsure, message us with your camera model and clear photos of the eyecup mount, the accessory port and the battery door, so we can help identify what you need.

Fitting

The eyecup is printed in rigid PETG, not soft rubber. It is cosmetic only: it does not flex or cushion like a rubber eyecup, so take care when using the viewfinder. Fit each part gently and check it sits as intended before regular use. Please message us before ordering if you need more detail.

Material & finish

Printed to order in our workshop in Great Dunmow, Essex. Tough black PETG is used for the all three parts. Fine layer lines are a normal part of the 3D-printed finish.

Made to order

Each set is printed after you order. See the delivery section for the current dispatch estimate and postage options.

About this replacement

This is an aftermarket replacement, not an original Olympus part. MAYDE is not affiliated with or endorsed by Olympus. Brand and model names are used only to identify the intended application.

Design credit

Based on the design "Replacement parts for Olympus E-M1 mk1, eyecup, port cover and battery door lever" by witonosfreestyle on Printables, licensed CC0 (public domain); credited with thanks. Printed and finished by MAYDE.

Image & fit status

The gallery contains illustrative product renders for this draft. Final product appearance, measurements and physical fit are awaiting confirmation before release. The images do not demonstrate a tested installation.

Questions about the part? Get in touch with MAYDE.